top of page

Load data for .300 AAC Blackout + .308 | 175gr | Berger LRBTHP

Recommended Powder(s):

.300 AAC Blackout + .308 | 175gr | Berger LRBTHP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 175gr | Berger LRBT Target
Manufacturer SKU:
30420
Bullet Weight:
175gr | 11.3g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
<<locked>>
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B1081_C348
Last updated:
2026-02-05
Recommended Twist Rate:
1:11 - 1:9

Load data for 28 loads in caliber .300 AAC Blackout with .308 | 175gr | Berger LRBT Target bullet and 14 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
93%
45658
90%
**13
100%
[Accurate 1680]*
<<locked>>
97%
42714
84%
**52
92%
Accurate 5744
<<locked>>
90%
45208
89%
**75
96%
Accurate No. 11 FS 👍
<<locked>>
90%
44715
88%
**65
99%
Hodgdon LilGun
<<locked>>
87%
44599
88%
**11
100%
IMR 4227
<<locked>>
96%
39842
78%
**06
97%
Lovex D060
<<locked>>
92%
45208
89%
**75
96%
Lovex D063
<<locked>>
89%
45455
90%
**68
97%
Lovex S040
<<locked>>
85%
44715
88%
**93
100%
Lovex S053
<<locked>>
96%
37173
73%
**90
99%
ReloadSwiss RS 36
<<locked>>
97%
37710
74%
**22
96%
Shooters World Blackout
<<locked>>
89%
45455
90%
**68
97%
Shooters World Buffalo Rifle
<<locked>>
92%
45208
89%
**75
96%
Vihtavuori N110
<<locked>>
96%
43859
86%
**32
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
88%
39233
77%
**40
99%
[Accurate 1680]*
<<locked>>
93%
37637
74%
**90
90%
[Accurate 5744]*
<<locked>>
82%
35447
70%
**44
94%
Accurate No. 11 FS
<<locked>>
83%
34766
68%
**44
97%
Hodgdon LilGun
<<locked>>
81%
36912
73%
**29
100%
IMR 4227
<<locked>>
92%
34983
69%
**40
96%
[Lovex D060]*
<<locked>>
84%
35447
70%
**44
94%
[Lovex D063]*
<<locked>>
82%
35491
70%
**44
94%
Lovex S040
<<locked>>
81%
40379
80%
**50
100%
Lovex S053
<<locked>>
93%
33591
66%
**44
99%
ReloadSwiss RS 36
<<locked>>
92%
32489
64%
**44
95%
[Shooters World Blackout]*
<<locked>>
82%
35491
70%
**44
94%
[Shooters World Buffalo Rifle]*
<<locked>>
84%
35447
70%
**44
94%
Vihtavuori N110
<<locked>>
89%
36056
71%
**47
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page